REAR SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Rear Suspension Member Installation Hole φ80 (3.15)
B, b Rear Suspension No. 1 Arm Installation Hole φ12.2 (0.48)
C, c Rear Suspension Member Standard Hole φ15 (0.59)
D, d Upper Control Rear Arm Installation Hole φ14.2 (0.56)
E, e Upper Control Rear Arm Installation Hole φ16.2 (0.64)
F, f Rear Suspension No. 2 Arm Installation Hole 14.2X19.2 (0.56X0.76)
G, g Rear Suspension Member Installation Hole φ80 (3.15)
A00WGRBE01