LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point G, g on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Panel Corner | - |
| B, b | Quarter Panel Standard Hole | 12X10.5 (0.47X0.41) |
| C | Upper Back Panel Reinforcement Center Mark | - |
| D, d | Quarter Inner Panel Rear Extension Corner | - |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Rear Floor Finish Plate Installation Hole | φ8.5 (0.34) |
| G, g | Luggage Compartment Door Lock Striker Installation Nut | M6 (0.24) |
| H, h | Rear Floor Side Rear Member Standard Hole | φ18 (0.71) |
| J, j | Rear Floor Side Rear Member Standard Hole | φ18 (0.71) |
| K, k | Rear Spring Support Hole | φ13 (0.51) |
| L, l | Center Body Pillar Assembly Mark | - |
| M, m | Millimeter Wave Radar Rear Sensor Installation Bolt | M6 (0.24) |
| n | Millimeter Wave Radar Rear Sensor Installation Bolt | M6 (0.24) |
