REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A00WGQT Remove Weld Points
    A00WGL6 Remove Weld Points
    A00WGK6 Remove Weld Points
    A00WGP9 Cut with Disc Sander etc.

      REMOVAL POINT

    1. Bend in the same way as *1.

    A00WGPBE01

  2. INSTALLATION

    Symbol Meaning
    A00WGHS Plug Weld
    A00WGJM Plug Weld
    A00WGPL Plug Weld
    A00WGPK Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00WGHIE01