REAR FLOOR PAN ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A00WGQT Remove Weld Points
    A00WGIJE01

  2. INSTALLATION

    Symbol Meaning
    A00WGHS Plug Weld
    A00WGPK Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Before temporarily installing the new parts, weld the rear floor pan, rear body floor panel No.1, rear floor pan reinforcement No.2, rear floor panel reinforcement No.3, rear floor crossmember bracket sub-assembly and weld bolts with the standard number of welding points.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00WGI3E01
    A00WGPXE01
    A00WGQ7E01