FRONT FENDER APRON ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A00WGQT Remove Weld Points
    A00WGL6 Remove Weld Points
    A00WGK6 Remove Weld Points
    A00WGP9 Cut with Disc Sander etc.
    A00WGN4 Cut and Join Location

      REMOVAL POINT

    1. Bend in the same way as *1.

    A00WGHZE01
    A00WGR5E01
    A00WGNRE01

  2. INSTALLATION

    Symbol Meaning
    A00WGHS Plug Weld
    A00WGJM Plug Weld
    A00WGPL Plug Weld
    A00WGN4 Cut and Join Location
    A00WGPK Fillet Weld
    A00WGII Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    4. Before temporarily installing the new parts, weld the floor crossmember sub-assembly No.3 and front fender apron assembly with the standard number of welding points.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00WGMSE01
    A00WGJ8E01
    A00WGR5E02
    A00WGN3E01