QUARTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A00WGRN

  1. REMOVAL

    Symbol Meaning
    A00WGQT Remove Weld Points
    A00WGN4 Cut and Join Location
    A00WGR4 Cut Location for Supply Parts
    A00WGILE01

  2. INSTALLATION

    Symbol Meaning
    A00WGPW Spot Weld
    A00WGHS Plug Weld
    A00WGII Butt Weld
    A00WGQ9 Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Before installing a new part, apply body sealer.

      Tech Tips


      • Apply body sealer evenly about 5 mm (0.20 in.) from the flange, avoiding any oozing.

      • Apply body sealer evenly, about 3 to 4 mm (0.12 to 0.16 in.) in diameter.

    4. After welding, apply foamed sealing material to the corresponding parts. (See the painting / coating)

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00WGM0E01