ROCKER REAR PANEL CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL

    Symbol Meaning
    A00WGQT Remove Weld Points
    A00WGN4 Cut and Join Location

      REMOVAL POINT

    1. Carefully cut the rocker panel reinforcement No.5 so not to damage *1.

    A00WGNUE01

  2. INSTALLATION

    Symbol Meaning
    A00WGPW Spot Weld
    A00WGHS Plug Weld
    A00WGII Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00WGM7E01