ROCKER FRONT PANEL CUT AND JOIN REPLACEMENT SECTIONS

A00WGO6

  1. REMOVAL

    Symbol Meaning
    A00WGQT Remove Weld Points
    A00WGL6 Remove Weld Points
    A00WGK6 Remove Weld Points
    A00WGP9 Cut with Disc Sander etc.
    A00WGN4 Cut and Join Location

      REMOVAL POINT

    1. *1 is reused.

    A00WGPNE01

  2. INSTALLATION

    Symbol Meaning
    A00WGPW Spot Weld
    A00WGHS Plug Weld
    A00WGJM Plug Weld
    A00WGPL Plug Weld
    A00WGPK Fillet Weld
    A00WGII Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    4. After welding the rocker panel reinforcement sub-assembly to the vehicle side, install the *2.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00WGM9E01