RADIATOR SUPPORT ASSEMBLY REPLACEMENT

A0120U6

  1. REMOVAL

    Symbol meaning
    A0120OQ Remove Weld Points
    A0120V6 Remove Weld Points
    A0120OG Cut with Disc Sander etc.
    A0120WJE01
    A0120P4E01

  2. INSTALLATION

    Symbol meaning
    A0120UZ Plug Weld
    A0120OC Plug Weld
    A0120QK Fillet Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    4. Measure the dimensions before installing the headlights.

    Reference Value
    Area Measurement Area Measurement
    *a 1483 mm (58.39 in.) *b 822 mm (32.36 in.)
    *c 1125 mm (44.29 in.) *d 1042 mm (41.02 in.)
    *e 837 mm (32.95 in.) *f 1056 mm (41.57 in.)
    *g 849 mm (33.43 in.) - -
    A0120OUE01
    A0120UNE02
    A0120OLE01