ROOF PANEL (for Standard Roof) ASSEMBLY REPLACEMENT

A011ZUZ

  1. REMOVAL

    Symbol meaning
    A011ZTV Remove Weld Points
    A011ZRYE01

  2. INSTALLATION

    Symbol meaning
    A011ZUB Spot Weld
    A011ZRI Plug Weld
    A011ZRW Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back window frame.

      Tech Tips

      Apply just enough body sealer for the new parts to make contact.

    4. After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

    5. After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

    6. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A011ZVY
    A011ZT5E01