REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT

  1. REMOVAL

    Symbol meaning
    A011ZTV Remove Weld Points
    A011ZSL Remove Weld Points
    A011ZSHE01
    A011ZSZE01

  2. INSTALLATION

    Symbol meaning
    A011ZRI Plug Weld
    A011ZPO Plug Weld
    A011ZOQ Assembly Mark

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    2. For positioning of the new parts, align the installation standard holes of the rear floor side rear member and the member.

    3. After welding, apply undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A011ZV2E01
    A011ZOXE01