QUARTER WHEEL HOUSING OUTER PANEL ASSEMBLY REPLACEMENT

  1. REMOVAL

    Symbol meaning
    A011ZTV Remove Weld Points
    A011ZUH Remove Weld Points
    A011ZSL Remove Weld Points
    A011ZVQ Cut with Disk Sander etc.
    A011ZON Cut and Join Location

      REMOVAL POINT

    1. Rocker reinforce outer is reused.

    2. After removing the rocker reinforce outer and roof side panel outer remove the quarter wheel house panel outer.

    3. Carefully cut the rocker reinforce outer so not to damage *1.

    A011ZQ2E01
    A011ZW4E01
    A011ZP7E01
    A011ZR2E01

  2. INSTALLATION

    Symbol meaning
    A011ZUB Spot Weld
    A011ZRI Plug Weld
    A011ZU4 Plug Weld
    A011ZPO Plug Weld
    A011ZQT Fillet Weld
    A011ZUN Butt Weld
    A011ZRW Body Sealer
    A011ZOQ Assembly Mark

      INSTALLATION POINT

    1. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

    2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    3. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

    4. After welding the quarter wheel house panel outer to the vehicle side, install the roof side panel outer and rocker reinforce outer.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A011ZTWE01
    A011ZTXE01
    A011ZSAE01
    A011ZUME01