FRONT SIDE MEMBER ASSEMBLY REPLACEMENT (PATTERN 2)

  1. REMOVAL

    Symbol meaning
    A011ZTV Remove Weld Points
    A011ZW1E01

  2. INSTALLATION

    Symbol meaning
    A011ZTV Remove Weld Points
    A011ZRI Plug Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. If the entire supply part is not needed, remove the part of the supply part that is needed.

    3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A011ZTAE02
    A011ZUFE01