CENTER BODY PILLAR CUT AND JOIN REPLACEMENT SECTIONS

A011ZP9

  1. REMOVAL

    Symbol meaning
    A011ZTV Remove Weld Points
    A011ZVQ Cut with Disc Sander etc.
    A011ZON Cut and Join Location
    A011ZVG Cut Location for Supply Parts

      REMOVAL POINT

    1. *1 is reused.

    A011ZRDE01

  2. INSTALLATION

    Symbol meaning
    A011ZRI Plug Weld
    A011ZON Cut and Join Location
    A011ZUN Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. If the entire supply part is not needed, remove the part of the supply part that is needed.

    4. Before temporarily installing the new parts, weld the center body pillar reinforce upper and center body pillar inner with the standard number of welding points.

    5. After welding the center body pillar reinforce upper and center body pillar inner to the vehicle side, install the rocker panel outer and *1.

    6. After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

    7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A011ZWRE01
    A011ZUVE01
    A011ZT7E01