REAR SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tech Tips

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Rear Suspension Member Installation Hole φ49.5 (1.95)
B, b Rear Suspension Lower Arm Installation Hole φ16 (0.63)
C, c Rear Suspension Member Standard Hole φ15 (0.59)
D, d Rear Suspension Member Installation Hole φ49.5 (1.95)
E, e Rear Suspension Lower Arm Installation Hole φ16 (0.63)
A0120QEE01