FRONT SUSPENSION CROSSMEMBER TWO-DIMENSIONAL DISTANCE

Tech Tips

  • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Frame Standard Hole φ13 (0.51)
B, b Front Frame Installation Hole φ62 (2.44)
C, c Front Frame Standard Hole φ13 (0.51)
D, d Front Frame Standard Hole φ13 (0.51)
E, e Front Frame Standard Hole φ13 (0.51)
F, f Front Suspension Lower Arm Installation Hole φ15 (0.59)
G, g Front Frame Installation Hole φ67.5 (2.66)
A0120U0E01
A0120UCE01