LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Panel Corner | - |
| B, b | Upper Back Reinforcement/Quarter Panel Adjoining Portion | - |
| C, c | Upper Back Reinforcement/Quarter Panel Adjoining Portion | - |
| D, d | Quarter Panel End Housing/Luggage Compartment Opening Trough Adjoining Portion | - |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Trim Installation Hole | φ8.5 (0.33) |
| G, g | Trim Installation Hole | φ8.5 (0.33) |
| H | Lock Striker Installation Nut | M8 (0.31) |
| J, j | Rear Floor Crossmember Standard Hole | φ13 (0.51) |
| K, k | Rear Suspension Installation Hole | φ9.5 (0.37) |
| L, l | Center Body Pillar Assembly Mark | - |
