ROOF PANEL (for Standard Roof) ASSEMBLY REPLACEMENT

A0120TS

  1. REMOVAL

    Symbol meaning
    A0120OQ Remove Weld Points
    A0120VGE01

  2. INSTALLATION

    Symbol meaning
    A0120S2 Spot Weld
    A0120UZ Plug Weld
    A0120P2 Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back window frame.

      Tech Tips

      Apply just enough body sealer for the new parts to make contact.

    4. After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

    5. After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

    6. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0120UK
    A0120SPE01