REAR FLOOR PAN ASSEMBLY REPLACEMENT

  1. REMOVAL

    Symbol meaning
    A0120OQ Remove Weld Points
    A0120V6 Remove Weld Points
    A0120POE01
  2. INSTALLATION

    Symbol meaning
    A0120UZ Plug Weld
    A0120OC Plug Weld
    A0120QK Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    2. Before temporarily installing the new parts, weld the spare wheel clamp bracket, rear floor pan reinforcement and weld bolts with the standard number of welding points.

    3. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    Reference Value
    Area Measurement Area Measurement
    *a 295 mm (11.61 in.) *b 741 mm (29.17 in.)
    *c 741 mm (29.17 in.) *d 295 mm (11.61 in.)
    *e 679 mm (26.73 in.) - -
    A0120TBE01
    A0120RYE01
    A0120RFE01