QUARTER WHEEL HOUSING OUTER PANEL ASSEMBLY REPLACEMENT

  1. REMOVAL

    Symbol meaning
    A0120OQ Remove Weld Points
    A0120PB Remove Weld Points
    A0120V6 Remove Weld Points
    A0120OG Cut with Disk Sander etc.
    A0120V7 Cut and Join Location

      REMOVAL POINT

    1. Rocker reinforce outer is reused.

    2. After removing the rocker reinforce outer and roof side panel outer remove the quarter wheel house panel outer.

    3. Carefully cut the rocker reinforce outer so not to damage *1.

    A0120TAE01
    A0120VDE01
    A0120VPE01
    A0120Q2E01

  2. INSTALLATION

    Symbol meaning
    A0120S2 Spot Weld
    A0120UZ Plug Weld
    A0120UY Plug Weld
    A0120OC Plug Weld
    A0120QK Fillet Weld
    A0120UX Butt Weld
    A0120P2 Body Sealer
    A0120PC Assembly Mark

      INSTALLATION POINT

    1. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

    2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    3. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

    4. After welding the quarter wheel house panel outer to the vehicle side, install the roof side panel outer and rocker reinforce outer.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0120PXE01
    A0120PFE01
    A0120SVE01
    A0120QVE01