CENTER BODY PILLAR CUT AND JOIN REPLACEMENT SECTIONS

A0120VB

  1. REMOVAL

    Symbol meaning
    A0120OQ Remove Weld Points
    A0120OG Cut with Disc Sander etc.
    A0120V7 Cut and Join Location
    A0120V9 Cut Location for Supply Parts

      REMOVAL POINT

    1. *1 is reused.

    A0120SYE01

  2. INSTALLATION

    Symbol meaning
    A0120UZ Plug Weld
    A0120V7 Cut and Join Location
    A0120UX Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. If the entire supply part is not needed, remove the part of the supply part that is needed.

    4. Before temporarily installing the new parts, weld the center body pillar reinforce upper and center body pillar inner with the standard number of welding points.

    5. After welding the center body pillar reinforce upper and center body pillar inner to the vehicle side, install the rocker panel outer and *1.

    6. After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

    7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0120UTE01
    A0120UDE01
    A0120S5E01