FRONT PASSENGER SIDE POWER WINDOW SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    A01IP1A

    1. Using moulding remover A, detach the clip and 7 claws, and remove the power window regulator switch assembly with front door armrest base panel.

    2. Disconnect the connector.

  2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

    A01ISQ5

    1. Detach the 2 claws and remove the regulator switch.