Click here

POWER WINDOW MASTER SWITCH REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01IN0RE01

      Using moulding remover A, detach the clip and 7 claws and remove the power window regulator master switch assembly with front door armrest base panel.

    2. Disconnect the connector.

  2. Click here

    REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. A01ISO7E01

      w/ Rear Door Power Window:


      1. Remove the 3 screws.

      2. Using moulding remover A, detach the 4 claws and remove the master switch assembly.

    2. w/o Rear Door Power Window:


      1. Remove the 3 screws and master switch assembly.

        Table 1. Text in Illustration
        *1 w/ Rear Door Power Window
        *2 w/o Rear Door Power Window