POWER WINDOW MASTER SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01IN0RE01

      Using moulding remover A, detach the clip and 7 claws and remove the power window regulator master switch assembly with front door armrest base panel.

    2. Disconnect the connector.

  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. A01ISO7E01
      Text in Illustration
      *1 w/ Rear Door Power Window
      *2 w/o Rear Door Power Window

      w/ Rear Door Power Window:


      1. Remove the 3 screws.

      2. Using moulding remover A, detach the 4 claws and remove the master switch assembly.

    2. w/o Rear Door Power Window:


      1. Remove the 3 screws and master switch assembly.