ROOF HEADLINING DISASSEMBLY


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

    A01IPHF

    1. Disconnect the connector.

    2. Detach the 4 claws and remove the No. 1 room light.

  2. REMOVE VANITY LIGHT ASSEMBLY

    A01ITU2E02
    Text in Illustration
    *1 Claw (A)
    *2 Claw (B)
    *3 Bulb Holder

    Tech Tips

    Use the same procedure to remove the vanity light on the other side.


    1. Detach the 2 claws (A) and separate the bulb holder from the vanity light as shown in the illustration.

    2. Detach the claw (B) and remove the vanity light.

  3. REMOVE NO. 1 ROOF SILENCER PAD (w/o Roof Sunshade System)

    A01ISYT

    1. Remove the 4 No. 1 roof silencer pads.

  4. REMOVE NO. 2 ROOF SILENCER PAD (w/o Roof Sunshade System)

    A01ISCT

    1. Remove the No. 2 roof silencer pad.

  5. REMOVE NO. 2 ROOF HEADLINING PAD (w/ Roof Sunshade System)

    A01IR7C

    1. Remove the 2 No. 2 roof headlining pads.

  6. REMOVE ROOF HEADLINING PAD

    A01IN7D

    1. Remove the roof headlining pad.

  7. REMOVE ROOF HEADLINING PAD END

    A01IS2S

    1. Remove the 2 roof headlining pad ends.

  8. REMOVE HEADLINING SUPPORT RETAINER

    A01ISFA

    Tech Tips

    Use the same procedure to remove the headlining support retainer on the other side.


    1. Remove the headlining support retainer.

  9. REMOVE NO. 1 ROOF WIRE


    1. w/o Roof Sunshade System:


      1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire.

        A01IPLOE01

    2. w/ Roof Sunshade System:


      1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

      2. Remove each piece of tape and the No. 1 roof wire.

        A01IN4ZE01

  10. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. w/o Roof Sunshade System:


      1. Remove the antenna cord from the cutout at the back of the roof headlining.

        A01ISZS

      2. Remove all the tape and the antenna cord from the roof headlining.

    2. w/ Roof Sunshade System:


      1. Remove the antenna cord from the cutout at the back of the roof headlining.

        A01IQ2R

      2. Remove all the tape and the antenna cord from the roof headlining.