AIR CONDITIONING PANEL (for Manual Air Conditioning System) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01IS8V

      Attach the 2 claws to connect the air mix damper control cable sub-assembly.

    2. A01IQKC

      Attach the 2 claws to connect the No. 2 heater control cable sub-assembly.

    3. Connect each connector.

    4. A01IN5R

      Attach the 4 clips to install the center instrument cluster finish panel assembly.

  2. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    A01INDX

    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 3 screws <C>.

    2. A01IQNM

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 3 screws <C>.

  3. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    A01IOQT

    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

    2. A01IQS2

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

  4. INSTALL SHIFTING HOLE COVER (for Manual Transaxle)

    A01INHVE01
    Text in Illustration
    *1 T Washer

    1. Attach the 5 claws and 3 clips to install the shifting hole cover.

    2. Install the knob spring.

    3. Install the T washer and twist it in the direction indicated by the arrow.

  5. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    A01IROS

    1. Connect the connector.

    2. Attach the 5 claws and 3 clips to install the position indicator housing.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

      A01IQX6E01

  7. INSTALL RADIO RECEIVER WITH BRACKET (w/ Audio)


    1. for Radio Receiver Type:

      Install the radio receiver with bracket Click here.

    2. for Radio and Display Type:

      Install the radio receiver with bracket Click here.

  8. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)

    A01ISEY

    1. Install the stereo opening cover with the 4 bolts.

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio, for Radio and Display Type)

    A01IRZ3

    1. Attach the 4 clips, 3 claws and 3 guides to install the center instrument cluster finish panel.

  10. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    A01IQZA

    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  11. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A01IPRP

      for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end LH.

    2. A01IOHW

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end LH.

  12. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    A01IRVW

    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end RH.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end RH.