AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.


    1. Customizing with intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Air Conditioner / Utility / Customize.

      5. Select the setting by referring to the table below.

        Air Conditioner
        Display Default Contents Setting
        Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C/-2 C
        Evaporator Control Automatic Function to set the evaporator control to the automatic position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up. Automatic/Manual
        Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Automatic/Manual
        Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. ON/OFF
        Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the front defroster is on. ON/OFF
        Blower Operation Setting (Stop&Start)* Blower OFF Function that sets the blower level to "1" while the Stop and Start System is controlling the idling stop. Blower OFF/Blower Level 1
        Outside Air Mode Auto Switch Function ON Function to automatically change the air inlet to FRESH mode when the vehicle is parked. ON/OFF

        • *: w/ Stop and Start System