REAR NO. 2 SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

    A01IQ6NE01
    Text in Illustration
    *1

    Component without harness connected

    (Rear No. 2 Seat Inner Belt Sub-assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2

      Seat belt fastened (for RH side)

      (Buckle switch is on)

      		 1 MΩ or higher

      Seat belt unfastened (for RH side)

      (Buckle switch is off)

      		 Below 1 Ω
      3 - 4

      Seat belt fastened (for LH side)

      (Buckle switch is on)

      		 1 MΩ or higher

      Seat belt unfastened (for LH side)

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt sub-assembly.