REAR NO. 1 SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY

    A01IRMSE02
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat 3 Point Type Inner Belt)


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2

      Seat belt fastened

      (Buckle switch is on)

      1 MΩ or higher
      1 - 2

      Seat belt unfastened

      (Buckle switch is off)

      Below 1 Ω

      If the operation is not as specified, replace the inner belt assembly.