FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A01ISO3E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

    2. for Driver Side:

      Connect the connector and attach the clamps.

    3. for Passenger Side:

      Connect the connectors and attach the clamps.

    4. A01IOL2

      Close the seatback cover and attach the 2 hooks as shown in the as illustration.

  2. INSTALL FRONT SEAT INNER CUSHION SHIELD LH


    1. A01IRB9E01
      Text in Illustration
      *1 Wire Harness Clamp
      *2 Hook

      Attach the wire harness clamp.

    2. Slide the front seat inner cushion shield LH to attach the hook.

    3. A01IT7C

      Push the front seat inner cushion shield LH to attach the hook and claw.

    4. Install the front seat inner cushion shield with the screw.

  3. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.