FRONT SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    A01IRFHE03
    Text in Illustration
    *1

    Component without harness connected

    (Front Seat Inner Belt)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      1 - 2

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    A01IQD9E01
    Text in Illustration
    *1

    Component without harness connected

    (Front Seat Inner Belt)

    		 *2 Connector A
    *3 Connector B - -

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A1 - B1 Always Below 1 Ω
      A2 - B3

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      A2 - B3

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.