Click here

FRONT SEAT CUSHION HEATER REMOVAL

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE FRONT SEAT ASSEMBLY

    (Click here)

  2. Click here

    REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Driver Side)


    1. A01IQ78E01

      Using a screwdriver, detach the 2 claws and remove the vertical seat adjuster knob cap.

      Table 1. Text in Illustration
      *1 Protective Tape
      Tip:

      Tape the screwdriver tip before use.

  3. Click here

    REMOVE VERTICAL ADJUSTING HANDLE LH (for Driver Side)


    1. A01IPV4

      Remove the 2 screws and vertical adjusting handle LH.

  4. Click here

    REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01IPYYE01

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Table 2. Text in Illustration
      *1 Protective Tape
      Tip:

      Tape the screwdriver tip before use.

  5. Click here

    REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A01IP89

      Detach the 2 hooks and disconnect the 2 rubber bands.

    2. A01IRWW

      Remove the 2 screws.

    3. Pull the front seat cushion shield LH to detach the claw.

      Table 3. Text in Illustration
      A01ISM9 Pull
      A01ISER Slide

    4. Slide the front seat cushion shield LH to detach the 2 hooks and remove the front seat cushion shield LH.

  6. Click here

    REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. A01INHB

      Remove the screw.

    2. Pull the front seat inner cushion shield LH to detach the hook and claw.

    3. A01IOSLE01

      Slide the front seat inner cushion shield LH to detach the hook and remove the front seat inner cushion shield LH.

      Table 4. Text in Illustration
      *1 Wire Harness Clamp
      *2 Hook

    4. Detach the wire harness clamp.

  7. Click here

    REMOVE FRONT SEAT UNDER TRAY (w/ Under Tray)


    1. A01IRKR

      Detach the 2 hooks and remove the front seat under tray.

  8. Click here

    REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. Detach the 2 hooks and open the seatback cover as shown in the illustration.

    2. for Driver Side:

      Disconnect the connector and detach the clamps.

    3. for Passenger Side:

      Disconnect the connectors and detach the clamps.

    4. A01IORF

      Remove the nut and front seat inner belt.

  9. Click here

    REMOVE SEAT CUSHION COVER WITH PAD


    1. A01IT5VE01

      Detach the piece of fastening tape and disconnect the airbag wire harness from the seat cushion cover with pad.

      Table 5. Text in Illustration
      *1 Fastening Tape
      *2 Airbag Wire Harness
    2. A01IOAP

      for Passenger Side:

      Detach the 2 hooks and disconnect the connector holder.

    3. w/ Seat Heater System:


      1. A01IRLA

        Detach the 3 wire harness clamps.

      2. A01ITSBE01

        Disconnect the connector.

    4. Detach the wire harness clamp and 3 hooks.

      Table 6. Text in Illustration
      *1 Wire Harness Clamp
      *2 Hook
    5. A01INQP

      Detach the hooks and remove the seat cushion cover with pad.

  10. Click here

    REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01IOE6

      Remove the hog rings and separate type front seat cushion cover from the front seat cushion pad.

  11. Click here

    REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. A01IQN7

      Cut off the tack pins and remove the front seat cushion heater assembly LH from the separate type front seat cushion cover.