REAR CENTER SEAT ASSEMBLY (for Rear No. 1 Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE INNER SEAT TRACK BRACKET COVER LH


    1. Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. A01IR2P

      Detach the 2 claws and 3 guides, and then remove the cover.

  2. REMOVE INNER SEAT TRACK BRACKET COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  3. REMOVE REAR SEAT INNER TRACK BRACKET COVER LH


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. A01IOZS

      Detach the 3 claws and guide, and then remove the cover.

  4. REMOVE REAR SEAT INNER TRACK BRACKET COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  5. REMOVE REAR CENTER SEAT ASSEMBLY


    1. A01IPU3

      Detach the 2 claws and wire harness clamp.

    2. Disconnect the connector.

    3. Lift up the seat track adjusting handle and move the seat to the foremost position.

    4. A01IQXJ

      Remove the 2 bolts.

    5. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    6. A01IR8H

      Operate the rear center back lock control lever and fold down the seatback.

    7. Remove the 2 bolts.

    8. A01IPV3

      Operate the rear back lock control lever RH and fold down the rear No. 1 seatback LH.

    9. A01IPR4

      Remove the rear center seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body or rear No. 1 seat assembly.