Click here

REAR NO. 2 SEAT ASSEMBLY INSTALLATION

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Click here
  1. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Place the rear No. 2 seat assembly in the cabin.

      Note:

      Be careful not to damage the vehicle body.

    2. A01IUCV

      Temporarily install the 2 bolts.

    3. Pull the 2 straps and raise the 2 seatbacks.

    4. A01IRCI

      Temporarily install the 5 bolts.

    5. A01IST0E01

      Tighten the bolts in the order shown in the illustration.

      37 N*m 377 kgf*cm 27 ft.*lbf

    6. Connect the connector under the seat.

  2. Click here

    INSTALL REAR NO. 2 SEAT TRACK COVER


    1. A01IOQC

      Attach the 2 guides and claw.

    2. Attach the 2 claws to install the cover.

  3. Click here

    INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER

    Tip:

    Use the same procedure to install the cover on the other side.


    1. A01IQ45

      Attach the 2 claws to install the cover.

  4. Click here

    INSTALL DECK TRIM SIDE BELT HOLE COVER RH

    Tip:

    Use the same procedure described for the LH side.

  5. Click here

    INSTALL DECK TRIM SIDE BELT HOLE COVER LH


    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  6. Click here

    INSTALL DECK FLOOR BOX RH


    1. w/o Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

      2. Install the bolt.

  7. Click here

    INSTALL DECK FLOOR BOX LH


    1. w/o Rear No. 2 Seat:


      1. Attach the 4 claws to install the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Attach the 3 claws and guide to install the deck floor box.

      2. Install the bolt.

  8. Click here

    INSTALL DECK RAIL COVER (w/o Spare Tire)


    1. Attach the 2 claws and 2 guides to install the deck rail cover.

    2. Install the clip.

  9. Click here

    INSTALL LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)


    1. Install the luggage compartment tray.

  10. Click here

    INSTALL DECK BOARD ASSEMBLY


    1. Attach the 4 claws and 6 clips to install the deck board.

  11. Click here

    INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover.