REAR NO. 2 SEAT ASSEMBLY INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Place the rear No. 2 seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Temporarily install the 2 bolts.

      A01IUCV

    3. Pull the 2 straps and raise the 2 seatbacks.

    4. Temporarily install the 5 bolts.

      A01IRCI

    5. Tighten the bolts in the order shown in the illustration.

      A01IST0E01
      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    6. Connect the connector under the seat.

  2. INSTALL REAR NO. 2 SEAT TRACK COVER


    1. A01IOQC

      Attach the 2 guides and claw.

    2. Attach the 2 claws to install the cover.

  3. INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure to install the cover on the other side.


    1. A01IQ45

      Attach the 2 claws to install the cover.

  4. INSTALL DECK TRIM SIDE BELT HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL DECK TRIM SIDE BELT HOLE COVER LH

    A01IMY3

    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  6. INSTALL DECK FLOOR BOX RH

    A01ISZR

    1. w/o Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

      2. Install the bolt.

  7. INSTALL DECK FLOOR BOX LH

    A01IU1X

    1. w/o Rear No. 2 Seat:


      1. Attach the 4 claws to install the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Attach the 3 claws and guide to install the deck floor box.

      2. Install the bolt.

  8. INSTALL DECK RAIL COVER (w/o Spare Tire)

    A01IP10

    1. Attach the 2 claws and 2 guides to install the deck rail cover.

    2. Install the clip.

  9. INSTALL LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)

    A01ISB5

    1. Install the luggage compartment tray.

  10. INSTALL DECK BOARD ASSEMBLY

    A01IRW6

    1. Attach the 4 claws and 6 clips to install the deck board.

  11. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A01IUDC

    1. Install the tonneau cover.