REAR NO. 1 SEAT ASSEMBLY DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Operate the rear back lock control lever RH and raise the seatback.

    2. Remove the rear seat headrest assembly.

  2. REMOVE REAR SEAT NO. 2 LEG SIDE COVER

    A01IN1TE01
    Text in Illustration
    *1 Hook A
    *2 Hook B

    1. Remove the screw.

    2. Pull the cover to detach the 2 hooks labeled A.

    3. Slide the cover to detach the 3 hooks labeled B and remove the rear seat No. 2 leg side cover.

  3. REMOVE REAR SEAT TRACK COVER LH


    1. A01IOK9

      Detach the 2 claws and clip.

    2. Detach the guide and remove the rear seat track cover LH.

  4. REMOVE REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY LH


    1. A01IO0C

      Detach the clamps.

    2. A01IOUTE01

      Detach the rubber band.

    3. Detach the clamps, and remove the nut and inner belt.

      Text in Illustration
      *1 Rubber Band

  5. REMOVE REAR SEAT LEG SIDE COVER LH

    A01IR4NE01
    Text in Illustration
    *1 Hook A
    *2 Hook B

    1. Remove the 2 screws.

    2. Pull the cover to detach the 2 hooks labeled A.

    3. Slide the cover to detach the hook labeled B and remove the rear seat leg side cover LH.

  6. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD


    1. A01IPG5

      Detach the 2 hooks and open the cover.

    2. Detach the 2 seatback cover rubber bands.

    3. Pull the 2 seatback cover rubber bands through the 2 seat cushion cover rubber bands.

      A01IRQNE01
      Text in Illustration
      *1 Seatback Cover Rubber Band *2 Seat Cushion Cover Rubber Band
    4. A01IQKX

      Detach the rubber band.

    5. A01IQ30

      Remove the hog rings and roll up the separate type rear seat cushion cover.

    6. A01ISRV

      Detach the 5 hooks and remove the rear No. 1 seat cushion cover with pad.

  7. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A01IQUO

      Remove the hog rings.

    2. A01ISKT

      Remove the hog rings and separate type rear seat cushion cover.

  8. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A01INFT

      Remove the screw and detach the 2 claws.

    2. A01ITBLE01

      Detach the 2 clamps of the cable ends.

    3. Disconnect the 2 cables in the order shown in the illustration and remove the rear back lock control lever sub-assembly LH.

  9. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH


    1. A01IRQH

      Remove the screw and detach the 2 claws.

    2. A01IT6SE01

      Detach the 2 clamps of the cable ends.

    3. Disconnect the 2 cables in the order shown in the illustration and remove the rear back lock control lever sub-assembly RH.

  10. REMOVE REAR NO. 1 SEATBACK BOARD


    1. Open the lower part of the rear seatback board.

    2. A01IMXVE01
      Text in Illustration
      *1 Hook
      *2 Guide

      Detach the 4 claws and 2 hooks.

    3. Detach the guide and remove the rear No. 1 seatback board.

  11. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01ITXU

      Detach the 3 hooks.

    2. A01IO0F

      Detach the 2 claws.

    3. Detach the 2 hooks and remove the rear seatback board sub-assembly LH.

  12. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD


    1. A01IT7QE01
      Text in Illustration
      *1 Rubber Band

      Detach the 3 hooks and 2 rubber bands.

    2. A01IS14

      Detach the 2 hooks.

    3. A01ITAYE01
      Text in Illustration
      *1 Hog Ring
      *2 Hook

      Remove the hog rings and detach the 2 hooks.

    4. A01IPI0

      Detach the 4 claws and remove the 2 rear seat headrest supports.

    5. A01IQYG

      Remove the rear No. 1 seatback cover with pad.

  13. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. A01IS1Q

      Remove the hog ring.

    2. A01IRZ1

      Remove the hog rings and separate type rear seatback cover.

  14. REMOVE REAR SEATBACK LOWER COVER SUB-ASSEMBLY LH


    1. A01ITCR

      Remove the hog rings.

    2. A01ISLF

      Remove the hog rings and rear seatback lower cover sub-assembly LH with rear seatback lower pad.

    3. A01IRMZ

      Remove the lower part of the rear seatback lower cover sub-assembly LH from the rear seatback lower pad.

    4. Remove the hog rings and rear seatback lower cover sub-assembly LH.

  15. REMOVE REAR SEATBACK COVER LH


    1. A01INFO

      Detach the 2 claws and guide and remove the rear seatback cover LH.

  16. REMOVE REAR SEATBACK COVER RH


    1. A01IRU9

      Detach the 2 claws and guide and remove the rear seatback cover RH.

  17. REMOVE REAR NO. 1 SEATBACK SPRING


    1. A01ISC9

      Temporarily install the rear back lock control lever RH.

    2. Operate the rear back lock control lever and fold down the seatback frame.

    3. A01ISDJ

      Detach the 4 hooks and remove the 2 rear No. 1 seatback springs.

  18. REMOVE NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY LH


    1. A01IP58

      Operate the seatback rear back lock control lever and raise the seatback frame.

    2. Remove the rear back lock control lever RH.

    3. A01IP4T

      Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts together with the 2 spacers.

    4. Remove the 2 bolts and No. 1 seat cushion frame sub-assembly LH.

  19. REMOVE RECLINING REMOTE CONTROL CABLE ASSEMBLY

    A01IPEHE01

    1. Detach the clamp of the cable end.

    2. Remove the reclining remote control cable assembly in the order shown in the illustration.

  20. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    A01IUCFE01

    1. Detach the clamp of the cable end.

    2. Remove the rear No. 1 seat lock cable assembly in the order shown in the illustration.

  21. REMOVE RECLINING REMOTE CONTROL CABLE ASSEMBLY

    A01IR97E01

    1. Detach the clamp of the cable end.

    2. Remove the reclining remote control cable assembly in the order shown in the illustration.

  22. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    A01IN93E01
    Text in Illustration
    *1 Cable Tie
    *2 Clamp

    1. Cut off the cable tie.

    2. Detach the clamp of the cable end.

    3. Remove the rear No. 1 seat lock cable assembly in the order shown in the illustration.

  23. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

    A01IRJPE01
    Text in Illustration
    *1 Cable Tie
    *2 Clamp

    1. Cut off the 2 cable ties.

    2. Detach the 2 clamps of the cable ends.

    3. Remove the No. 2 seat adjuster control cable assembly in the order shown in the illustration.

  24. REMOVE NO. 1 SEATBACK FRAME SUB-ASSEMBLY LH


    1. A01INOA

      Remove the 4 bolts and No. 1 seatback frame sub-assembly LH.