REAR NO. 1 SEAT ASSEMBLY REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR DOOR SCUFF PLATE LH

    A01IQ4G

    1. Detach the 9 claws and 2 clips, and remove the rear door scuff plate.

  2. REMOVE INNER SEAT TRACK BRACKET COVER LH


    1. Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. A01IR2P

      Detach the 2 claws and 3 guides, and then remove the cover.

  3. REMOVE REAR SEAT OUTER TRACK BRACKET COVER LH


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. A01IT0X

      Detach the 2 claws and 2 guides, and then remove the cover.

  4. REMOVE REAR SEAT INNER TRACK BRACKET COVER LH


    1. A01IOZS

      Detach the 3 claws and guide, and then remove the cover.

  5. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. A01IPU3

      Detach the 2 claws and wire harness clamp.

    2. Disconnect the connector.

    3. Lift up the seat track adjusting handle and move the seat to the foremost position.

    4. A01IRQ9

      Remove the 2 bolts.

    5. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    6. A01IU9G

      Remove the 2 bolts.

    7. Operate the rear back lock control lever RH and fold down the seatback.

    8. Remove the rear No. 1 seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body or rear center seat assembly.