AIRBAG CUT-OFF INDICATOR LIGHT REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. for Automatic Air Conditioning System:


      1. A01IQDGE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the instrument panel finish panel end LH.

      2. Using a moulding remover A, detach the 3 clips and 2 guides, and remove the instrument panel finish panel end LH.

    2. for Manual Air Conditioning System:


      1. A01ITLUE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the instrument panel finish panel end LH.

      2. Using a moulding remover A, detach the 3 clips and guide, and remove the instrument panel finish panel end LH.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01IU46E01
    Text in Illustration
    *1 Protective Tape

    1. for Automatic Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end RH.

      2. Using a moulding remover A, detach the 3 clips, claw and 2 guides, and remove the instrument panel finish panel end RH.

    2. A01IQX3E01
      Text in Illustration
      *1 Protective Tape

      for Manual Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end RH.

      2. Using a moulding remover A, detach the 3 clips, claw and guide, and remove the instrument panel finish panel end.

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

      A01ISYGE01

  4. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    A01IROS

    1. Detach the 5 claws and 3 clips.

    2. Disconnect the connector and remove the position indicator housing.

  5. REMOVE SHIFTING HOLE COVER (for Manual Transaxle)

    A01IOOWE01
    Text in Illustration
    *1 T Washer

    1. Twist the T washer in the direction indicated by the arrow and remove it.

    2. Remove the knob spring.

    3. Detach the 5 claws and 3 clips, and remove the shifting hole cover.

  6. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    A01ITJ5

    1. for Automatic Air Conditioning System:


      1. Remove the 3 screws <C>.

      2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.

        Tech Tips

        If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.

    2. A01IOIV

      for Manual Air Conditioning System:


      1. Remove the 3 screws <C>.

      2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.

  7. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    A01IOJM

    1. for Automatic Air Conditioning System:


      1. Remove the 2 screws <C>.

      2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.

        Tech Tips

        If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.

    2. A01IN3V

      for Manual Air Conditioning System:


      1. Remove the 2 screws <C>.

      2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.

  8. REMOVE TELLTALE LIGHT ASSEMBLY (for Automatic Air Conditioning System)


    1. A01INR2E01
      Text in Illustration
      *A w/ TOYOTA Parking Assist-sensor System
      *B w/o TOYOTA Parking Assist-sensor System

      Detach the 2 claws and remove the light.

  9. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Air Conditioning System)

    A01IRZ3

    1. Detach the 4 clips, 3 claws and 3 guides, and remove the center instrument cluster finish panel.

  10. REMOVE TELLTALE LIGHT ASSEMBLY (for Manual Air Conditioning System)


    1. A01IR94E01
      Text in Illustration
      *A w/ TOYOTA Parking Assist-sensor System
      *B w/o TOYOTA Parking Assist-sensor System

      Detach the 2 claws and remove the light.