AIRBAG CUT-OFF SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A01ISAM

      Connect the connector.

    2. Attach the 2 claws to install the cutoff switch cylinder.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01IRG9

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01ISP7E01

      Attach the glove compartment door stopper to the glove compartment door as shown in the illustration.

    3. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the glove compartment door to engage the 2 stoppers.

      Text in Illustration
      *1 Stopper

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.