REAR AIRBAG SENSOR (w/o Rear No. 2 Seat) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A01IUDC

    1. Remove the tonneau cover.

  3. REMOVE NO. 1 DECK BOARD

    A01IO5W

    1. Remove the No. 1 deck board.

  4. REMOVE NO. 2 DECK BOARD

    A01IUJ6

    1. Detach the 5 clips and remove the No. 2 deck board.

  5. REMOVE FRONT DECK FLOOR BOX

    A01INUT

    1. Remove the 3 bolts and front deck floor box.

  6. REMOVE LOWER DECK TRIM SIDE BOARD LH

    A01IN88

    1. Detach the claw and 2 guides, and remove the lower deck trim side board.

  7. REMOVE LOWER DECK TRIM SIDE BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE DECK FLOOR BOX LH

    A01IU1X

    1. w/o Rear No. 2 Seat:


      1. Detach the 4 claws and remove the deck floor box.

    2. A01IN2Q

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 3 claws and guide, and remove the deck floor box.

  9. REMOVE DECK FLOOR BOX RH

    A01ISZR

    1. w/o Rear No. 2 Seat:


      1. Detach the 2 claws and guide, and remove the deck floor box.

    2. A01IPFF

      w/ Rear No. 2 Seat:


      1. Remove the bolt.

      2. Detach the 2 claws and guide, and remove the deck floor box.

  10. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)


    1. Remove the rear deck floor box.

      A01IO7TE01

  11. REMOVE REAR DECK TRIM COVER

    A01ITUG

    1. Detach the 6 claws and 4 guides, and remove the rear deck trim cover.

  12. REMOVE REAR DOOR SCUFF PLATE LH

    A01IRIX

    1. Attach the 5 claws and guide to install the rear door scuff panel.

  13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A01ISHX

    1. Remove the rear door opening trim weatherstrip.

  14. REMOVE FRONT DECK SIDE TRIM COVER LH

    A01ING9E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tech Tips

      Tape the screwdriver tip before use.

  15. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    A01IUGKE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure to remove the deck trim side service hole cover on the other side.


    1. Using a screwdriver, detach the 4 claws and 2 guides, and remove the deck trim side service hole cover.

      Tech Tips

      Tape the screwdriver tip before use.

  16. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    A01IUD8

    Tech Tips

    Use the same procedure for all the luggage hold belt strikers.


    1. Remove the bolt and luggage hold belt striker.

  17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    A01IULD

    1. w/ Rear No. 1 Seat:

      Remove the bolt and rear No. 1 seat belt anchor.

    2. A01IRRR

      w/ Rear No. 2 Seat:

      Remove the bolt and rear No. 2 seat belt anchor

    3. Remove the 2 bolts.

    4. Detach the 6 clips and 7 claws.

    5. Disconnect the connector and remove the deck trim side panel.

      A01ISVL

  18. REMOVE REAR AIRBAG SENSOR LH


    1. A01IOYJ

      Remove the bolt and rear airbag sensor.

    2. Disconnect the connector.