CENTER AIRBAG SENSOR ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY


    1. Remove the rear console box sub-assembly Click here.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. for Automatic Air Conditioning System:


      1. A01IQDGE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the instrument panel finish panel end LH.

      2. Using a moulding remover A, detach the 3 clips and 2 guides, and remove the instrument panel finish panel end LH.

    2. for Manual Air Conditioning System:


      1. A01ITLUE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the instrument panel finish panel end LH.

      2. Using a moulding remover A, detach the 3 clips and guide, and remove the instrument panel finish panel end LH.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01IU46E01
    Text in Illustration
    *1 Protective Tape

    1. for Automatic Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end RH.

      2. Using a moulding remover A, detach the 3 clips, claw and 2 guides, and remove the instrument panel finish panel end RH.

    2. A01IQX3E01
      Text in Illustration
      *1 Protective Tape

      for Manual Air Conditioning System:


      1. Put protective tape around the instrument panel finish panel end RH.

      2. Using a moulding remover A, detach the 3 clips, claw and guide, and remove the instrument panel finish panel end.

  5. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    A01IQZA

    1. Detach the 8 claws and 4 guides.

    2. Disconnect the connector and remove the center instrument panel register.

  6. REMOVE RADIO RECEIVER ASSEMBLY (w/ Audio)


    1. Remove the radio receiver assembly Click here.

  7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    A01IRZ3

    1. Detach the 4 clips, 3 claws and 3 guides, and remove the center instrument cluster finish panel.

  8. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)

    A01ISEY

    1. Remove the 4 bolts and stereo opening cover.

  9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

      A01ISYGE01

  10. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    A01IROS

    1. Detach the 5 claws and 3 clips.

    2. Disconnect the connector and remove the position indicator housing.

  11. REMOVE SHIFTING HOLE COVER (for Manual Transaxle)

    A01IOOWE01
    Text in Illustration
    *1 T Washer

    1. Twist the T washer in the direction indicated by the arrow and remove it.

    2. Remove the knob spring.

    3. Detach the 5 claws and 3 clips, and remove the shifting hole cover.

  12. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    A01ITJ5

    1. for Automatic Air Conditioning System:


      1. Remove the 3 screws <C>.

      2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.

        Tech Tips

        If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.

    2. A01IOIV

      for Manual Air Conditioning System:


      1. Remove the 3 screws <C>.

      2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.

  13. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    A01IOJM

    1. for Automatic Air Conditioning System:


      1. Remove the 2 screws <C>.

      2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.

        Tech Tips

        If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.

    2. A01IN3V

      for Manual Air Conditioning System:


      1. Remove the 2 screws <C>.

      2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.

  14. REMOVE FRONT NO. 1 CONSOLE BOX INSERT


    1. Detach the 3 claws and guide, and remove the front No. 1 console box insert.

      A01IUSGE01

  15. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    1. Detach the 3 claws and guide, and remove the front No. 2 console box insert.

      A01IQC5E01

  16. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    A01IPGW

    1. Remove the screw <D>.

    2. Disconnect the connector.

    3. Detach the 4 clips and remove the lower No. 1 instrument panel finish panel.

  17. REMOVE CENTER AIRBAG SENSOR ASSEMBLY


    1. A01IR50

      Disconnect the connector.

    2. Remove the 3 bolts and center airbag sensor.