CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. Install the curtain shield airbag with the 11 bolts.

      A01ISW3E02
      Torque:
      for bolt A
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }
      for bolt B
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)


    1. Install the curtain shield airbag with the 9 bolts.

      A01ISTTE01
      Torque:
      for bolt A
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }
      for bolt B
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  3. INSTALL ROOF HEADLINING ASSEMBLY


    1. Install the roof headlining Click here.