Click here

FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Remove the instrument panel safety pad sub-assembly (Click here).

  2. Click here

    REMOVE DEFROSTER NOZZLE ASSEMBLY


    1. Remove the 3 screws <B> and defroster nozzle.

  3. Click here

    REMOVE INSTRUMENT PANEL STAY RH

    Tip:

    Use the same procedure described for the LH side.

  4. Click here

    REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. Remove the 2 screws <B> and heater to register duct assembly.

    2. A01IQ79

      Remove the screw <B>.

    3. Detach the claw and remove the No. 2 side defroster nozzle duct.

  5. Click here

    REMOVE INSTRUMENT PANEL WIRE ASSEMBLY


    1. A01IMZ4

      Disconnect the connector and remove the wire.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

  6. Click here

    REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    1. A01IO2V

      Remove the 2 screws.

    2. A01IRAYE01

      Detach the 5 hooks (A).

      Table 1. Text in Illustration
      *1 Hook (A)
      *2 Hook (B)

    3. Detach the 5 hooks (B) and remove the instrument panel passenger airbag.