Click here

KNEE AIRBAG ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. A01ITXQ

      Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Attach the 6 claws to install the instrument panel airbag.

    3. Install the 4 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  2. Click here

    INSTALL STEERING COLUMN COVER


    1. A01IRAC

      Attach the 2 claws and install the steering column lower cover as shown in the illustration.

    2. A01IR2N

      Attach the 4 claws.

    3. A01IPH0

      Attach the claw.

      Tip:

      Press the area around the claw to attach it.

  3. Click here

    INSTALL NO. 1 SWITCH HOLE BASE


    1. w/ Entry and Start System:


      1. Connect the connector.

      2. Attach the 2 claws and 2 clips to install the No. 1 switch hole base.

    2. A01ISBI

      w/o Entry and Start System:


      1. Attach the 2 claws and 2 clips to install the No. 1 switch hole base.

  4. Click here

    INSTALL NO. 2 SWITCH HOLE BASE


    1. for LHD:

      Attach the 5 claws and 5 clips to install the No. 2 switch hole base.

    2. A01IQ8G

      for RHD:

      Attach the 3 claws and 5 clips to install the No. 2 switch hole base.

  5. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)


    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

    2. A01IQS2

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

  6. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)


    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 3 screws <C>.

    2. A01IQNM

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 3 screws <C>.

  7. Click here

    INSTALL SHIFTING HOLE COVER (for Manual Transaxle)


    1. Attach the 5 claws and 3 clips to install the shifting hole cover.

    2. Install the knob spring.

    3. Install the T washer and twist it in the direction indicated by the arrow.

      Table 1. Text in Illustration
      *1 T Washer
  8. Click here

    INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)


    1. Connect the connector.

    2. Attach the 5 claws and 3 clips to install the position indicator housing.

  9. Click here

    INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01IQX6E01

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  10. Click here

    INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)


    1. Install the stereo opening cover with the 4 bolts.

  11. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)


    1. Attach the 4 clips, 3 claws and 3 guides to install the center instrument cluster finish panel.

  12. Click here

    INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio)


    1. for Radio Receiver Type:

      Install the radio receiver assembly (Click here).

    2. for Radio and Display Type:

      Install the radio receiver assembly (Click here).

  13. Click here

    INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  14. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end RH.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end RH.

  15. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A01IPRP

      for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end LH.

    2. A01IOHW

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end LH.

  16. Click here

    INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Attach the claw and guide to install the No. 1 instrument panel under cover.

    2. Install the 2 screws <A>.

  17. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  18. Click here

    CHECK SRS WARNING LIGHT


    1. Check the SRS warning light (Click here).