KNEE AIRBAG ASSEMBLY INSTALLATION


  1. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. A01ITXQ

      Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Attach the 6 claws to install the instrument panel airbag.

    3. Install the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL STEERING COLUMN COVER

    Note

    If the steering column cover is installed in an incorrect order, it will not be possible to assemble the steering column cover.


    1. A01IRRJ

      Attach the claw and 2 pins to install the upper steering column cover.

  3. INSTALL NO. 1 SWITCH HOLE BASE

    A01ITKS

    1. w/ Entry and Start System:


      1. Connect the connector.

      2. Attach the 2 claws and 2 clips to install the No. 1 switch hole base.

    2. A01ISBI

      w/o Entry and Start System:


      1. Attach the 2 claws and 2 clips to install the No. 1 switch hole base.

  4. INSTALL NO. 2 SWITCH HOLE BASE

    A01IS5R

    1. for LHD:

      Attach the 5 claws and 5 clips to install the No. 2 switch hole base.

    2. A01IQ8G

      for RHD:

      Attach the 3 claws and 5 clips to install the No. 2 switch hole base.

  5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

    A01IOQT

    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

    2. A01IQS2

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

  6. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

    A01INDX

    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 3 screws <C>.

    2. A01IQNM

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 3 screws <C>.

  7. INSTALL SHIFTING HOLE COVER (for Manual Transaxle)

    A01INHVE01
    Text in Illustration
    *1 T Washer

    1. Attach the 5 claws and 3 clips to install the shifting hole cover.

    2. Install the knob spring.

    3. Install the T washer and twist it in the direction indicated by the arrow.

  8. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

    A01IROS

    1. Connect the connector.

    2. Attach the 5 claws and 3 clips to install the position indicator housing.

  9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

      A01IQX6E01

  10. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)

    A01ISEY

    1. Install the stereo opening cover with the 4 bolts.

  11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    A01IRZ3

    1. Attach the 4 clips, 3 claws and 3 guides to install the center instrument cluster finish panel.

  12. INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio)


    1. for Radio Receiver Type:

      Install the radio receiver assembly Click here.

    2. for Radio and Display Type:

      Install the radio receiver assembly Click here.

  13. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    A01IQZA

    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  14. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    A01IRVW

    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end RH.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end RH.

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A01IPRP

      for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end LH.

    2. A01IOHW

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end LH.

  16. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01IR0Y

    1. Attach the claw and guide to install the No. 1 instrument panel under cover.

    2. Install the 2 screws <A>.

  17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  18. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.