COMBINATION METER INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL COMBINATION METER ASSEMBLY


    1. A01INN0

      Connect the connector.

    2. Attach the clamp.

    3. A01INRI

      Attach the clip to install the combination meter.

    4. Install the 2 screws.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    A01ISRP

    1. Attach the 11 guides and 4 claws to install the instrument cluster finish panel.

  3. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    A01IQZA

    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A01IPRP

      for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end LH.

    2. A01IOHW

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end LH.

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    A01IRVW

    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end RH.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end RH.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.