Click here

COMBINATION METER INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL COMBINATION METER ASSEMBLY


    1. A01INN0

      Connect the connector.

    2. Attach the clamp.

    3. A01INRI

      Attach the clip to install the combination meter.

    4. Install the 2 screws.

  2. Click here

    INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Attach the 11 guides and 4 claws to install the instrument cluster finish panel.

  3. Click here

    INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  4. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end.

    2. A01INF5

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end.

  5. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end.

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).