METER / GAUGE SYSTEM SYSTEM DESCRIPTION

METER GAUGE AND WARNING/INDICATOR

Text in Illustration
*1	SIL Indicator Light (UP/DOWN) (for Manual Transaxle) Shift Position Indicator (except Manual Transaxle)	*2	SIL Indicator Light (UP/DOWN) (for Automatic Transaxle)
*3	Tachometer	*4	Speedometer
*5	Multi-information Display Fuel Receiver Gauge Clock ODO/TRIP Outside Temperature Eco Driving Indicator Zone Display (except Manual Transaxle)	*6	ODO/TRIP Switch

Meter/Gauge
Item	Details
Speedometer	Based on a signal received from the wheel speed sensors, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN).
Tachometer	The combination meter receives an engine speed signal from the ECM and the gauge needle operates (CAN).
ODO/TRIP meter	The combination meter receives a vehicle speed pulse integration signal from the skid control ECU and the ODO/TRIP meter display operates (CAN). The ODO/TRIP meter display changes when the ODO/TRIP switch is operated.
Fuel receiver gauge	The combination meter receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).

Warning/Indicator
Item	Details
BEAM indicator light	Receives BEAM indicator light signals from the main body ECU (CAN).
FRONT FOG indicator light*1	The indicator turns on when a FRONT FOG illumination command signal is received (CAN).
REAR FOG indicator light*2	The indicator turns on when a REAR FOG illumination command signal is received (CAN).
LEVELING indicator light*3	Receives leveling signals from the leveling ECU (Direct line).
SRS warning light	Receives malfunction signals from the center airbag sensor (CAN).
Front seat belt warning light	Receives driver seat belt signals (unfastened) from the main body ECU (CAN). Receives passenger seat belt signals (unfastened) from the front seat inner belt assembly RH10, LH4 (Direct line). Receives passenger seat signals from the separate type front seat cushion pad (occupant detection sensor) (Direct line).
Brake warning light	Comes on when the parking brake switch is on (CAN). Comes on when the brake fluid level warning switch is on (Direct line). Comes on to inform the driver that a malfunction in the EBD has occurred.
CHARGE warning light	Receives malfunction signals from the generator (Direct line and CAN).
ABS warning light	Receives malfunction signals from the brake actuator assembly (CAN).
MIL	Receives malfunction signals from the ECM (Direct line).
FUEL warning light	Receives signals from the fuel sender gauge indicating low or no fuel (Direct line).
Engine coolant temperature COOL	Receives engine coolant temperature signals from the ECM (CAN).
Engine coolant temperature HOT	Receives engine coolant temperature signals from the ECM (CAN).
SLIP indicator light	Receives malfunction signals from the brake actuator assembly (CAN).
TAIL indicator light	The indicator turns on when a taillight illumination signal is received (CAN).
Turn signal indicator light (LH/RH)	Receives a turn signal from the FLASHER relay (Direct line).
EPS warning light	Receives power steering warning signals from the power steering ECU (CAN).
Master warning light	Receives warning signals from sensors and ECUs (Direct line and CAN).
SIL indicator light (UP/DOWN)*5	Receives a gear shift indicator signal from the ECM (CAN).
Eco Driving Indicator Light*6	Receives an Ecology lamp indicator signal from the ECM (CAN (CAN No. 1 Bus)) and illuminates when the vehicle is being driven in eco-friendly.
SPORT indicator light*6	Receives a sport signal from the ECM (CAN).
Glow indicator light*7	Receives a glow signal from the ECM (CAN).
Cruise indicator light*8	Receives a cruise control switch signal from the ECM (CAN).13 Receives a cruise control switch signal from the driving support ECU (CAN).14
Speed limiter indicator light8, 13	Receives a warning canceling switch signal from the ECM (CAN).
Cruise set indicator light*8	Receives a cruise control switch signal from the ECM (CAN).13 Receives a cruise control switch signal from the driving support ECU (CAN).14
VSC OFF indicator light	Receives a VSC OFF indicator signal from the brake actuator assembly (CAN).
Tire pressure warning light*11	Receives a tire pressure warning signal from the tire pressure warning ECU and receiver (Direct line).
Stop and start cancel indicator light*12	Receives a stop and start cancel indicator signal from the engine stop and start ECU (CAN).
Stop and start indicator light*12	Receives a stop and start indicator signal from the engine stop and start ECU (CAN).
A/T P shift position indicator*6	Receives a P signal from the ECM (CAN).
A/T R shift position indicator*6	Receives an R signal from the ECM (CAN).
A/T N shift position indicator*6	Receives an N signal from the ECM (CAN).
A/T D shift position indicator*6	Receives a D signal from the ECM (CAN).
A/T M (1 to 7) shift position indicator*6	Receives a signal (1 to 7) from the ECM (CAN).
A/T M (1 to 6) shift position indicator*9	Receives a signal (1 to 6) from the ECM (CAN).