GLOVE BOX LIGHT REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01IP4S

    1. Push in the sides of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. Detach the glove compartment door stopper from the glove compartment door as shown in the illustration.

    3. A01IP3S

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

    A01IRYJ

    1. Remove the 2 screws <B>.

    2. Detach the 7 claws and 5 guides.

    3. Disconnect the connector and remove the glove compartment door.

  3. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A01IS9O

      Detach the 2 claws and remove the light.

    2. Disconnect the connector.