ENGINE HOOD COURTESY SWITCH INSTALLATION


  1. INSTALL HOOD LOCK ASSEMBLY


    1. A01IQZ3E01
      Text in Illustration
      *1 MP grease

      Apply MP grease to the sliding areas of the lock.

    2. A01IQR4

      Connect the hood lock control cable.

    3. A01ITHB

      Connect the connector.

    4. Install the hood lock with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  2. INSTALL NO. 1 WATER HOSE CLAMP BRACKET

    A01IP24

    1. Attach the 2 claws and install the water hose clamp bracket to the upper radiator support with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  3. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A01IQMS

      Attach the 4 hooks to install the radiator support opening cover.

    2. Install the 3 clips.